Specifications; Platforms Supported; Getting Started; Play With Arduino - SeeedStudio Grove Loudness Sensor Manual

More details about Grove modules please refer to

Specifications

Parameter Value/Range
Voltage 3.5~10 VDC
Working Frequency 5~2000 Hz
Sensitivity -60~-56dBV/Pa
Signal-to-noise Ratio >58 dB
Output Signal range Analog Signal (0-
1023)

Platforms Supported

Arduino Raspberry Pi
warning
Caution
The platforms mentioned above as supported is/are an indication of the module's software or theoritical
compatibility. We only provide software library or code examples for Arduino platform in most cases. It
is not possible to provide software library / demo code for all possible MCU platforms. Hence, users
have to write their own software library.

Getting Started

edit
Note
If this is the first time you work with Arduino, we firmly recommend you to see
Arduino before the start.

Play With Arduino

Hardware
Step 1. Prepare the below stuffs:
Seeeduino V4.2 Base Shield
Get One Now Get One Now
Step 2. Connect Grove-Loudness Sensor to A0 port of Grove-Base Shield.
Step 3. Plug Grove - Base Shield into Seeeduino.
Step 4. Connect Seeeduino to PC via a USB cable.
Grove System
Getting Started with
Grove-Loudness Sensor
Get One Now