Voice Dialing; The Magic Word - Sony Ericsson Z710c User Manual

To activate voice dialing and
record names
Record names using the phone,
portable handsfree, or Bluetooth™
handsfree.
1 } Settings }
the
Control } Voice Dialing } Activate
} Yes } New Voice Cmd.
contact.
2 If the contact has more than one
number, use
numbers. Select the number to add
the voice command to. Record a voice
command such as "John mobile".
3 Instructions appear. Wait for the tone
and say the command to record. The
voice command is played back to you,
if the recording quality is acceptable.
4 If the recording sounds OK to you
} } No
Yes. If not
To record another voice command for
} New Voice Cmd. } Add
a contact
again and repeat steps 2-4 above.
Caller name
Hear your recorded contact name
when you receive a call from that
contact.
To turn the caller name on or off
} Settings }
the
Control } Play Caller
This is the Internet version of the user's guide. © Print only for private use.
} Voice
General tab
and select a
and to view the
and repeat step 3.
} Voice
General tab
Name.

Voice dialing

Start voice dialing from standby using
the phone, a portable handsfree, a
Bluetooth headset or by saying your
magic word.
To voice dial from the phone
1 From standby, press and hold one of
the volume keys.
2 Wait for the tone and say a recorded
name, for example "John mobile". The
name is played back to you and the
call is connected.
To voice dial with a handsfree
1 From standby, press and hold the
handsfree button, or press the
Bluetooth™ headset button.
2 Wait for the tone and say a recorded
name, for example "John mobile". The
name is played back to you and the
call is connected.

The magic word

Record and use a voice command as
a magic word to activate voice control
without pressing any keys. The magic
word can only be used with a wired
portable or vehicle handsfree.
Magic word is not supported by
Bluetooth™ devices.
Calling 31