Sony Ericsson Z710c User Manual page 81

To open code memo for the first time
1 } Organizer } Code
message with instructions appears
}
Continue.
2 Enter a four–digit passcode
}
Continue.
3 Re-enter the new passcode to
confirm.
4 Enter a checkword (maximum 15
}
characters) Done. The checkword
can consist of both letters and
numbers.
To add a new code
1 } Organizer } Code Memo
your passcode
2 Enter a name associated with the
}
code Continue.
3 Enter the code
To change the passcode
1 } Organizer } Code Memo
your passcode
Passcode.
2 Enter your new passcode
3 Re–enter the new passcode
}
Continue.
4 Enter a checkword
Forgot your passcode?
If you forget your passcode, you must
reset the code memo.
This is the Internet version of the user's guide. © Print only for private use.
Memo. A
and enter
} New Code }
Add.
}
Done.
and enter
} More } Change
}
Continue.
}
Done.
To reset code memo
1 } Organizer } Code Memo
any passcode to access the code
memo. The checkword and codes that
are then shown are incorrect.
2 } More }
Reset.
3 Reset code memo?
The code memo is reset and all entries
are cleared. The next time you enter
the code memo, you must start at
%
81 To open code memo for the first
time.
Profiles
Your phone has predefined profiles
that are set. Some, for example, ring
volume and other options may be
adjusted automatically to suit a certain
environment or an accessory. You can
reset all profile settings to how they
were set when you bought your
phone.
To select a profile
Press and select a profile or
} Settings }
the
} Profiles
and select a profile.
and enter
}
appears Yes.
General tab
More features 81