Advertisement
Step 6
INSTALL UPPER MOUNTING POST ON CAB FRAME
POSITION ASSEMBLED CAB OVER SNOW THROWER
PARTS NEEDED
Mounting posts with 30 mm bolts (2)
L
Q
Q
S
S
S
S
R
R
K
1
Before mounting assembled cab onto the snow thrower, loosely secure a
mounting post [K] and the upper clamp top plate [L] together.
Note: Frame is shown without fabric for visibility of placement location
3
Position the assembled cab over the snow thrower.
DETAIL A
SCALE 1 : 2
a r i e n s co . co m
ARIENS COMPANY, BRILLION, WI 954110, USA
2
A
C
Use the 30 mm hex bolts [Q] around the main frame [C] of assembled cab frame.
Note: Be careful not to pinch the fabric skin [V] when securing clamp on frame.
4
K
Drop the support brackets [K] on the cab into the outer mounting posts that are
attached to the machine [N] and [O].
Note: It may be necessary to adjust the position of the lower mounting posts in
order to slide upper mounting posts [K] into them.
9
TOOLS NEEDED
~15 in
Detail of left side mounting post insertion
K
O
N
1/2 in. Box
Wrench
OR
Adjustable
Wrench
OR
1/2 in. Socket
Wrench
Q
Q
V
L
K
K
O
Advertisement
