Advertisement
Step 2
ASSEMBLE THE BACK HOOP FRAME
NOTE: It may help to place the parts flat on the ground for easier assembly.
PARTS NEEDED
F
H
G
F
1.1
F
The back hoop side poles [F] are designed to fit together by matching tapered
ends as shown.
4
G
F
Repeat with the remaining back hoop
corner poles [G] and the remaining top
back hoop side poles [F] set.
a r i e n s co . co m
ARIENS COMPANY, BRILLION, WI 954110, USA
F
F
5
H
G
Insert each end of the back hoop top
pole [H] into the ends of both back
hoop corner poles [G].
2
F
F
Connect two side poles [F] together
for each side of the cab frame.
6
Insert the back hoop side pole assembly
into the upper stub tubes on the right
and left side of the frame.
5
TOOLS NEEDED
None
3
F
F
Insert the back hoop corner poles [G]
over the end of the top back hoop side
poles [F].
7
Make sure all the poles are fully inserted
before proceeding.
G
Advertisement
