Advertisement
Step 4
INSTALL THE CAB SKIN ONTO THE FRAME
NOTE: Fabric shell will be tight when properly assembled.
PARTS NEEDED
1
V
Slide the pocket in the top of the skin [V] over the
installed front hoop assembly.
4
4
4
1
7
2
3
6
Attach rip-and-grip tabs in the proper sequence. Fabric
will be tight to the frame and hoop assemblies.
a r i e n s co . co m
ARIENS COMPANY, BRILLION, WI 954110, USA
2
D
Pull the skin to the back and secure the elastic strap
at the back of the skin [V] around the end of the
mounting bar end [D]. Repeat process on the
opposite side.
5
5
Continue attaching all the rip-and-grip tabs to the frame, back hoop and front hoop assemblies. Make sure to
correctly attach the rip-and-grip tabs to the frame.
V
7
TOOLS NEEDED
NONE
3
B
Slide the front elastic strap at the bottom of the skin
[V] around the right mounting bar corner [B].
Repeat on the other side with the left mounting bar C.
V
Advertisement
