Table of Contents
Advertisement
GPRS settings that are available:
• APN (Access point name address) – the address of
the external data network you want to connect to,
either an IP address or a text string.
• User id – your user id to log on to the external
data network.
• Password – your password to log on to the
external data network.
• Passwd request (Password request) – if this
setting is on, you are asked for a password each
time you log on to the external data network.
• Allow calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS
session, select Automatic. If not, select GPRS
only.
• IP address – the IP address that the phone uses
when communicating with the network. If you do
not enter an address, the network provides you
with a temporary IP address.
• DNS address – if the network does not provide the
IP address to the DNS server automatically, you
may enter it here.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
48
Setting up WAP
This is the Internet version of the user's guide. © Print only for private use.
GSM
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM specific as follows:
• Phone number – the phone number of
your Internet service provider.
• Data rate – select the speed you want for the
connection.
• Dial type – select analogue or ISDN connection.
To create a data account manually
1. Scroll to Connectivity,
Data accounts,
, Add account?,
YES
2. Select an account type for access.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
5. Scroll to Save?,
.
YES
To edit a data account
1. Scroll to Connectivity,
Data accounts,
.
YES
2. Select a data account,
3. Select Edit.
, Data comm.,
,
YES
YES
.
YES
.
YES
, Data comm.,
,
YES
YES
.
YES
Advertisement
Table of Contents
