Voice Dialling - Sony Ericsson K700c Owner's Manual

To activate voice dialling and
record names
1
} Settings } General
the
} Voice dialling } Activate } New voice
select a contact.
2
If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as "John mobile" for the
phone number you selected.
3
Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that you
want to record. The voice command is played
back to you.
4
If the recording sounds ok
and repeat step 3.
5
To record another voice command for a contact
} New voice
again and repeat steps 2-5 above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
This is the Internet version of the user's guide. © Print only for private use.
} Voice control
tab
and
} Yes. If not } No
To turn the caller name On or Off
} Settings }
General
the
} Play caller
name.

Voice dialling

You can voice dial by saying a pre-recorded voice
command. Start voice dialling from standby using
the phone, a portable handsfree, a Bluetooth headset
or by saying your magic word.
To make a call from the phone
1
From standby, press and hold one of the
volume buttons.
2
Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
"John mobile". The name is played back to you
and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button, or
Bluetooth headset button.
Calling
} Voice control
tab
31