Operating Instruction - Nexgrill 720-0543 Assembly & Operating Instructions

Check for Gas Leakage
WARNING
FOR YOUR SAFETY: Failure to inspect this connection or
follow these instructions could cause a fire or an
explosion which can cause death, serious bodily injury,
or damage to property.
Burner Connections
Make sure the regulator valve and hose connections are securely
fastened to the burner and the tank.
If your unit was assembled for you, visually check the connection
between the burner pipe and orifice. Make sure the burner pipe fits
over the orifice.
Please refer to diagrams for proper installation. If the burner pipe
does not rest flush to the orifice, please contact service line: 1-800-
913-8999.
Tank/Gas Line Connection
Make 2-3 oz. of leak solution by mixing one part liquid dishwashing
soap with three parts water.
Make sure control knobs are off. Turn LP gas tank ON at valve.
Spoon leak check solution at all "x" locations.
If any bubble appears, turn LP gas tank OFF, reconnect and re-test.
If you continue to see bubbles after several attempts, disconnect
LP gas source and contact 1.800.913.8999 for assistance.
If no bubbles appears, turn tank OFF after one minute, and wipe
away solution and proceed.
NOTE: Keep a spray bottle of soapy water near the gas
supply valve and check the connections before each use.
LP gas valve
with orifice
14

Operating Instruction

Side Burner