Opening The Burner; Closing The Burner - Riello RS 310/M BLU Installation, Use And Maintenance Instructions

Forced draught gas burners
Table of Contents

Advertisement

7.3

Opening the burner

Disconnect the electrical supply from the burner
by means of the main system switch.
DANGER
Turn off the fuel interception tap.
DANGER
7.4

Closing the burner

Refit following the steps described in "Access to head internal
part" on page 20, but in reverse order; refit all burner components
as they were originally assembled.
After carrying out maintenance, cleaning or
checking operations, reassemble the cover and
all the safety and protection devices of the burner.
Maintenance
Wait for the components in contact with heat
sources to cool down completely.
To open the burner, use the same procedure set out in "Access
to head internal part" on page 20.
35
GB
20153481

Advertisement

Table of Contents
loading

Table of Contents