Important Safety Instructions - Harman KARDON CITATION MULTIBEAM 1100 Owner's Manual

/
IMPORTANT SAFETY
INSTRUCTIONS
Verify Line Voltage Before Use
The CITATION MULTIBEAM 1100 soundbar has been designed
for use with 100-240 volt, 50/60 Hz AC current. Connection to
a line voltage other than that for which your product is intended
can create a safety and fire hazard and may damage the unit.
If you have any questions about the voltage requirements for
your specific model or about the line voltage in your area,
contact your selling dealer before plugging the unit in to a wall
outlet.
Do Not Use Extension Cables
To avoid safety hazards, use only the power cable supplied
with your unit. We do not recommend that extension cables be
used with this product. As with all electrical devices, do not run
power cables under rugs or carpets, or place heavy objects on
them. Damaged power cables should be replaced immediately
by an authorized service center with a cable that meets factory
specifications.
Handle the AC Power Cable Gently
When disconnecting the power cable from an AC outlet, always
pull the plug; never pull the cable.
If you do not intend to use your speaker for any considerable
length of time, disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product.
Opening the cabinet may present a shock hazard, and any
modification to the product will void your warranty. If water
accidentally falls inside the unit, disconnect it from the AC
power source immediately, and consult an authorized service
center.
2