Connecting The Camera To A Pc - Niceboy VEGA X STAR User Manual

on the phone and leave only Wi-Fi turned on. The application is
compatible with mobile phones with iOS 9.0 and later or with
Android 8.0 and later.

CONNECTING THE CAMERA TO A PC

Connect the camera to a PC using a USB data cable. After
connection, the camera screen will show the following modes:
1. External drive: you can use the PC to manage files stored on the
memory card inside the camera (the camera acts as an external
drive connected to the PC).
2. PC camera: can be used as a PC camera for software that allows
the connection of an external camera.
3. Ready for use: the camera remains on and can be used as a
normal camera. It will also be charged from the PC.
4. Charging: turns the camera off and starts charging it. Allows the
camera to charge faster.
REMOTE CONTROL (Optional Accessory)
The camera supports remote control, which can be bought
separately from any reputable dealer.
The remote requires no pairing with the camera. Once a
memory card is inserted into the camera, the remote will start
communicating with the camera automatically. To start or stop video
recording, press the video button on the remote. To take a photo,
press the photo button on the remote.
Remote range: 20 meters (direct line of sight)
Attention: the remote is not waterproof!
PACKAGE CONTENTS
Niceboy VEGA X STAR camera
Waterproof case
Battery
Set of fasteners for connecting the waterproof case or camera with
tripod thread to other accessories.
Adhesive helmet mount.
Manual
33