Niceboy VEGA X STAR User Manual page 32

Attention: format the memory card regularly on a PC to avoid video
recording errors. More information about the use of the card and its
formatting will be provided by the manufacturer of the SD card.
BATTERY/CHARGING
To insert or remove the battery, open the cover on the underside
of the camera. Charge the camera by connecting the enclosed
USB cable into the USB port (11) on the left side of the camera and
connecting the other end to a charging adapter e.g. from a mobile
phone (5 V voltage and minimum current of 1 A). The camera can
also be charged by connecting the USB cable to a PC or a power
bank.
Attention: fully charge the battery before first use. Do not subject
the camera to large temperature swings. Keep the battery and
camera under watch during charging. Charge time is dependent on
the output current of the charging adapter. The camera will charge
faster when it is turned off.
CONNECTING THE CAMERA TO A PHONE VIA WI-FI
Install iSmartDV (for free) onto your phone (available in the AppStore
for iOS and Google Play for Android). Do not start the application
right after installing it and follow these instructions:
1. Turn on the Wi-Fi on the camera by long-pressing the Wi-Fi
button (6)
2. Open the Wi-Fi settings on your mobile phone and connect to
the camera's network (name: Niceboy VEGA X STAR, password:
1234567890).
3. Once your phone is connected to the camera's network, you can
launch the application, link the application to the camera and
start controlling the camera through the application.
4. To turn off the Wi-Fi, press the Wi-Fi button (6) on the camera.
Attention: before using the application, enable all the permissions
for the application in the phone's settings, turn off „data connection"
32