Microsd Card - Niceboy VEGA X STAR User Manual

Date and time: date and time settings.
Language: camera menu language setting.
Format: erases all data on the memory card.
System: allows accessing information about the camera's firmware,
information about the memory card (capacity and remaining free
space) and enables performing a factory reset (resets the camera to
the original factory settings).
WATERPROOFNESS
The camera is resistant to submersion in water as long as the
camera is inside the waterproof case, and as long as the following
conditions are met:
The case is resistant to submersion up to a depth of 30 meters.
Before using the camera inside the case underwater, make sure the
back hatch of the case is properly closed via the mechanism on the
top of the case. The hatch and the sealing of the case must be free
of dust, dirt, sand etc. If the case was used in salt water, wash it with
drinking water afterwards. Do not dry the case with textile fabrics or
external heat sources (hair dryer, microwave etc.), always leave the
case to air dry on its own. The touch control screen of the camera
cannot be used when the camera is in the case. Control the camera
using the buttons instead.
Attention: the camera is not waterproof without the case! Use only
with the original case to ensure waterproofness.

MICROSD CARD

Always use a brand-name microSD card of type USH-I U3 with fast
video writing capability and capacity of up to 64 GB. Before using the
SD card in the camera for the first time, the card must be formatted
on a PC to a FAT32 file system. Only format the card using software
designed for the purpose.
Place the SD card into the slot with the pins facing towards the
camera lens (front of the camera). Insert the SD card into the
camera by clicking it in place. Remove by reversing the motion.
31