Changing The Opening Direction Of The Door - Klarstein BROOKLYN 23 SLIM Manual

EN
22
CHANGING THE OPENING DIRECTION OF THE
DOOR
1 Remove the upper hinge cover (2).
2 Remove the screws (1) securing the upper hinge (3) to the unit, then remove
the upper hinge.
3 Lift the door and place it on a padded surface to prevent scratching.
4 Remove the screws (7) holding the bottom hinge (6), then remove the bottom
hinge.
5 Remove the foot (5) and move it to the opposite side.
6 Remove the cover plate (4) on the opposite side.
7 Install the bottom hinge on the opposite side with the screws.
8 Place the door in place, making sure that the door rests against the bottom
hinge.
9 Hold the door in the closed position and attach the upper hinge to the unit
with the screws (1). Make sure that the door is correctly aligned horizontally
and vertically so that the seals are closed on all sides before finally tightening
the screws.
10 Install the upper hinge cover on the upper hinge.