Nomad Fp8 Operations; Assigning Fp8 Knobs; Fader Assign - Zaxcom Nomad FP8 User Manual

Zaxcom Nomad FP8

Nomad FP8 Operations

Your Nomad will need to be running software version 6.46 or higher for the FP8 to operate.

Assigning FP8 Knobs

Each individual potentiometer (pot) on the Nomad FP8 are user assignable as an analog or digital fader, a
TRX transmitter gain controller or an input trim controller. Any combination of assignments can be made.
To assign a pot go to the Main Menu and select external faders.
When you enter the external fader assign menu you will have to ability to individually assign each fader.

Fader assign

The external fader assign menu allows you to assign any FP8 fader to mix any of the 6 analog inputs, 4 return
inputs or 8 AES digital inputs. Individual faders can be assigned in any order or in any combination.
NOTE: When assigning faders make sure that any input is only assigned to only one fader – which
includes the 6 faders on Nomad. So if you assign an input to the FP8 make sure it is not assigned to any
other FP8 fader nor assigned to any of Nomads faders.
Nomad Fader Assign
FP8 Fader Assign
Analog inputs assigned
Digital inputs assigned
Return inputs assigned
5
FP8 Operations