Step 2. Assembly - North Star 157117 Owner's Manual

You must assemble your pressure washer before it can be used. Refer to Fig157117-4 and follow the steps
listed below:
INSTALL NOZZLES INTO
DESIGNATED NOZZLE
STORAGE LOCATION
Step 1. Install handle with two (2) 5/16-18 x 2 1/2" Bolts, two (2) 5/16" flat washer through Base and
Handle and secure with two (2) 5/16-18 Flange Nuts.
Step 2. Install Hose Hook into right side of Handle using two (2) 5/16-18 Flange Nuts.
Step 3. Install Nozzles into designated nozzle storage location.
Assembly and Initial Set-Up

STEP 2. ASSEMBLY

5/16-18 X 3/4" TWO (2)
FLANGE NUTS
INSTALL HOSE HOOK INTO
RIGHT SIDE OF HANDLE
USING TWO (2) 5/16-18 X 3/4"
FLANGE NUTS
5/16" TWO (2)
FLAT WASHER
5/16-18 X 2 1/2" TWO (2)
HHSF GR5, BOLT
12
Fig157117-4