Table of Contents
Advertisement
FIRST TIME USE
Before use:
•
remove adhesives stuck on the hob;
•
remove cardboard guards and protective plastic film;
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, press the
the cooking zone displays light up.
To switch off, press the same button until the displays switch off. All the
cooking zones are deactivated.
If the hob has been in use, the residual heat indicator "H" remains lit until
the cooking zones have cooled down.
If within 10 seconds of switching on, no function is selected, the hob
switches off automatically.
SWITCHING ON AND ADJUSTING COOKING ZONES
Power indicator display
Selected cooking zone indication
Cooking zone positioning
power levels, adjustable with the "+"/"–" buttons, going from "1" (min.
power) to "9" (max. power). Some cooking zones have a fast boil function
(Booster), shown on the display with the letter "P".
DEACTIVATION OF COOKING ZONES
Select the cooking zone to be switched off by pressing the "+" or "–"
button (a dot lights up at the bottom right of the power level indicator).
Press the button "–" to set the level to "0".
The cooking zone can also be switched off by pressing the "+" and "–"
buttons simultaneously.
The cooking zone switches off, and the residual heat indicator "H" lights
up
CONTROL PANEL LOCK
This function locks the controls to prevent an accidental switching on of
the hob.
To activate the control panel lock function, switch on the hob, hold the
button for three seconds; an acoustic signal and a luminous indicator
next to the padlock signal activates. The control panel is locked except for
the deactivation function.
To deactivate the control panel lock, repeat the activation procedure. The
luminous dot goes off and the hob is active again.
The presence of water, liquid spilled from pots or any objects resting on
the button below the symbol can accidentally activate or deactivate the
control panel lock function.
TIMER
The timer can be used to set the cooking time for a maximum of 99
minutes (1 hour and 39 minutes) for all cooking zones.
Select the cooking zone to be used with the timer (an illuminated dot
appears to the bottom right-hand side of the heat setting indicator on
the display), press the button with the clock symbol, then set the desired
cooking time using the buttons "+" and "–" of the timer function. After
a few seconds, the timer begins the countdown (an illuminated dot is
visible next to the zone for which the timer has been activated).
Once the set time has elapsed, an acoustic signal sounds and the
cooking zone switches off automatically.
To deactivate the timer, press the "–" button until the display shows "0:0"
or hold the button with the clock symbol for at least 3 seconds.
IMPORTANT: The timer function can only be used with one cooking
zone at a time.
button for approx. 2 seconds until
After switching the hob on and
placing the pot on the chosen
cooking zone, adjust the power
level using the "+" button. Upon
activation, the display shows level
"0".
Each cooking zone has various
•
check whether the hob has been damaged during transport. If in
doubt, contact the After Sales Service.
RESIDUAL HEAT INDICATOR
The hob is fitted with a residual heat indicator for each cooking zone.
These indicators alert the user when cooking zones are still hot.
If the display shows
, the cooking zone is still hot. If the residual
heat indicator of a given cooking zone is lit, that zone can be used, for
example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
INCORRECT OR MISSING POT INDICATOR
The hob features an automatic pot detection system for all cooking
zones. If you are using a pot that is not suitable, not correctly positioned
or not of the correct dimensions for your induction hob, the display with
the cooking zone power level indicator flashes. In these situations it is
recommended to reposition the pot on the hob surface until you find
the correct position. If no pot is detected within 60 seconds, the hob
switches off.
FAST BOIL FUNCTION (BOOSTER )
This function, only present on some cooking zones, makes it possible to
exploit the hob's maximum power (for example to bring water to the boil
very quickly).
To activate the function, select the cooking zone by pressing the
corresponding position button and keep the "+" button pressed until "P"
appears on the display. After 10 minutes' use of the booster function, the
appliance automatically sets the zone to level 9.
Advertisement
Table of Contents
