Table of Contents
Advertisement
PRODUCT DESCRIPTION
CONTROL PANEL
On / O
ACCESSORIES
POTS AND PANS
Only use pots and pans made from ferromagnetic
OK
NO
material which are suitable for use with induction hobs.
To determine whether a pot is suitable, check for the
symbol (usually stamped on the bottom). A magnet
may be used to check whether pots are magnetic. The
quality and the structure of the pot base can alter cooking performance.
RECOMMENDED POT BOTTOM WIDTHS
Place the pot on the required cooking zone before switching the hob on.
For good cooking results, the diameter of the pot's base should match
the size of the hotplate.
IMPORTANT: The cooking zones will not switch on if pots are not the right
size.
To determine the pot's size, please measure the pot's base and refer to
recommended pots bottom width table for perfect usage and correct pan
detection. Each cooking zone has a minimum limit of detecting pans, which
varies depending on the material of the pan being used. You should therefore
use the cooking zone that is most suitable for the diameter of your pan.
Power and cooking time adjustment buttons
Cooking zone controls and corresponding display
1
2
Timer display
DIAMETER (cm)
14,5
18
21
28
IMPORTANT: To avoid permanent damage to the hob
•
do not use pots with bottoms that are not flat;
•
do not use metal pots with enamelled bottom;
•
do not place hot pots/pans over the control panel.
Control panel lock
MAX. (cm)
MIN. (cm)
14,5
10
18
12
21
15
28
17
EN
Advertisement
Table of Contents
