Thrane&Thrane SAILOR 6217 VHF Installation Manual

INSTALLATION GUIDE
SAILOR 6217 VHF DSC - AIS Receiver
What's in the box?
Sun Screen Transceiver
Wheel Knob
(2 pcs.)
U-Mounting
Bracket
Flush Mount
Bracket (2 pcs.)
Screw M4x12 Screw ø3.9x19 Square Nut Screw M4x45 Cap for LTW BD/BU
TORX 20 TORX 20 M4x7x2.2 TORX 20
(5 pcs.) (5 pcs.) (5 pcs.) (5 pcs.)
Dimensions for the VHF

How to install the VHF flush mount

Square Nut M4x7x2.2 (4 pcs.)
Gasket Flush Mount Bracket (2 pcs.)
Screw M4x45 TORX 20 (4 pcs.)
Max wall thickness 26mm
99-130248
Note!
- Firmly tie back and secure any wires not used in order to
avoid possibility for mutual shorting or shorting to ground!
- To ensure waterproof sealing:
If the surface isn't plane and/or rigid remove the gasket and
seal with silicone sealant between the VHF and the surface.
Very important information!
Do not remove the membrane.
If you remove the membrane the radio will not be waterproof.
Membrane
All manuals and user guides at all-guides.com
Installation Guide

How to install the VHF on desktop and overhead

INSTALLATION GUIDE
SAILOR 6217 VHF DSC - AIS Receiver
USER & INSTALLATION MANUAL
What's in the box?
USER & INSTALLATION MANUAL
SAILOR 6217 VHF DSC - AIS Receiver SAILOR 6217 VHF DSC - AIS Receiver
Sun Screen Transceiver Gasket User & Installation Manual
Wheel Knob
(2 pcs.) Screw M4x12
TORX 20 (3 pcs.)
U-Mounting Bracket Cradle
Flush Mount Screw ø3.9x19
Bracket (2 pcs.) TORX 20 (3 pcs.)
Hand Microphone

Drilling plan on desktop and overhead

Screw M4x12 Screw ø3.9x19 Square Nut Screw M4x45 Cap for LTW BD/BU Fuse Connection Cable, Power Cable
(5 pcs.) TORX 20 (5 pcs.) TORX 20 (5 pcs.) M4x7x2.2 (5 pcs.) TORX 20 Connector (2 pcs.) 6.3x3.2mm (10AT) 1 m
Very important information!
Do not remove the membrane.
If you remove the membrane the radio will not be waterproof.
Membrane
99-130249
How to install the VHF flush mount

Cable assembly for waterproof installation

Gasket
Square Nut M4x7x2.2 (4 pcs.) Connect the 4 cable connections with rubber vulcanizing tape as shown .....
Gasket Flush Mount Bracket (2 pcs.) 1.
Screw M4x45 TORX 20 (4 pcs.)
Connect to LOUD HAILER
(RED isolation on inner connector) Connect to POWER +
(RED wire)
A A
B B 2.
User & Installation Manual Connect to POWER -
(BLUE wire)
Connect to EXT. SPEAKER
Max wall thickness 26mm (WHITE isolation on inner connector)
99-130248
Note!
- Firmly tie back and secure any wires not used in order to
avoid possibility for mutual shorting or shorting to ground!
- To ensure waterproof sealing:
If the surface isn't plane and/or rigid remove the gasket and
seal with silicone sealant between the VHF and the surface.
How To Install The Gps And The Chart Plotter - Cable Connections
Screw M4x12
TORX 20 (3 pcs.)
99-130891-B Chart Plotter
Description 99-130891-B Pin Wire color Pin assignments
Description NMEA in- NMEA in+ Pin 2 1 Wire color Brown Blue Front View Pin assignments
NMEA in+ NMEA out- NMEA out+ 1 4 3 Green White Brown Front View GPS
NMEA in- EAR 2 / Line out Mike 2 / Line in 2 5 6 Grey Yellow Blue 7 8 9 2 1
Cradle NMEA out- Hook_PTT 3 7 Pink White 6 10 5 3 4
Battery Supply when radio is on Internal GND = - Battery 8 9 Black Red GPS Cable (NMEA 0183)/
NMEA out+ Internal GND = - Battery 4 10 Orange - SCREEN (Drain) Green Chart Plotter Cable
Mike 2 / Line in 5 Yellow 8 1 For waterproof installation use
EAR 2 / Line out 6 Grey 7 9 2 rubber vulcanizing tape
Hook_PTT 7 Pink 6 10 3
Battery Supply when radio is on 8 Red 5 4 Note!
Internal GND = - Battery 9 Black Firmly tie back and secure any wires not used in order to avoid
Internal GND = - Battery 10 Orange - SCREEN (Drain)
possibility for mutual shorting or shorting to ground!
Screw ø3.9x19
TORX 20 (3 pcs.)
Hand Microphone
Fuse Connection Cable, Power Cable
Connector
6.3x3.2mm (10AT) 1 m
(2 pcs.)
Connect to LOUD HAILER
(RED isolation on inner connector)
Connect to POWER +
(RED wire)
A A
B B
Connect to POWER -
(BLUE wire)
Connect to EXT. SPEAKER
(WHITE isolation on inner connector)
How to install the VHF on desktop and overhead
Tilting ±20°
4 x M4 or hole for
self-tapping ø3.9
23mm 150mm
196mm
3.
4.
Green, Pin 4, NMEA out+
White, Pin 3, NMEA out-
Blue, Pin 2, NMEA in-
Brown, Pin 1, NMEA in+
99-131043-B
Drilling plan on desktop and overhead
99-130249
Cable assembly for waterproof installation
Connect the 4 cable connections with rubber vulcanizing tape as shown .....
1.
2.

How to prevent water ingress

Connector for Hand Microphone or Handset - If not used, put the cap
from the ACC connector on the front connector to prevent water ingress.
Tilting ±20°
4 x M4 or hole for
self-tapping ø3.9
23mm 150mm
196mm
3.
4.