Wireless Network; Customize Wireless Settings - TP-Link TL-WPA4220 User Manual

Chapter 3
Done!
3 5
3 5 1
The powerline extender's wireless network name (SSID), password, and security option
are preset in the factory. The preset SSID and password can be found on the product
label. You can customize the wireless settings according to your needs.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Wireless
To enable or disable the wireless function:
Select the box to enable the wireless function. Deselect the box to disable wireless
function. If disabled, all wireless settings will be ineffective.
To change the wireless network name (SSID) and password:
The default SSID is TP-Link_XXXX, and the default password is printed on the product
label. You can change the default ones by directly entering new ones in the field. SSID is
up to 32 characters, and the value in both SSID and password is case-sensitive.
Note:
Remember to write down the new SSID and password, for you will be disconnected when new settings are
effective.
Downloaded from ManualsNet.com
Extender
When the Wi-Fi LED blinks quickly for 3 seconds and then stays
on, the Wi-Fi Clone process is complete.

Wireless Network

Customize Wireless Settings

> Settings page.
search engine
Configuring via Web Management Interface
Wi-Fi LED
Wi-Fi Button
16