Pump Filter - LG F2T1TNM0W Owner's Manual

by gently pushing it back into
place.
CAUTION:
at the water inlet valve may
become clogged due to water
quality or lack of required
maintenance and may break
down. This may cause a water
leak. Any such breakdowns are
out of the scope of the warranty.

7.3 Pump Filter

1
3
5
The pump filter system in your
Washing Machine prolongs the
life of the pump by preventing
lint from entering your machine.
We recommend that you clean
the pump filter every 2 months.
The pump filter is located behind
the cover on the front-lower right
corner.
To clean the pump filter:
1. You may use the washing
powder spade (*) supplied
with your machine or liquid
The filters
2
4
6
EN - 33 EN - 33
detergent level plate to open
the pump cover.
2. Lodge the end of the powder
spade or liquid detergent
level plate in the opening of
the cover and gently press
backwards. The cover will
open.
• Before opening the filter
cover, place a container under
the filter cover to collect any
water left in the machine.
• Loosen the filter by turning
anticlockwise and remove by
pulling. Wait for the water to
drain.
NOTE:
Depending on
the amount of water inside
the machine, you may have
to empty the water collection
container a few times.
3. Remove any foreign materials
from the filter with a soft
brush.
4. After cleaning, re-fit the filter
by inserting it and turning
clockwise.
5. When closing the pump cover,
ensure that the mountings
inside the cover meet the
holes on the front panel side.
6. Close the filter cover.
WARNING:
in the pump may be hot, wait
until it has cooled down before
carrying out any cleaning or
maintenance.
(*) Specifications may vary
depending on the machine
purchased.
The water