Installation; Removing The Transit Bolts; Adjusting The Feet / Adjusting Adjustable Stays - LG F2T1TNM0W Owner's Manual

3. INSTALLATION

3.1 Removing the Transit Bolts

4
X
4
X
1. Before operating the washing
machine, remove the 4 transit
bolts and rubber spacers from
the rear of the machine. If the
bolts are not removed, they
may cause heavy vibration,
noise and malfunction of
the machine and void the
warranty.
2. Loosen the transit bolts by
turning them anticlockwise
with an appropriate spanner.
3. Remove the transit bolts with
a straight pull.
4. Fit the plastic blanking caps
supplied in the accessories
bag into the gaps left by the
removal of the transit bolts.
The transit bolts should be
stored for future use.
NOTE:
Remove the
transit bolts before using the
machine for the first time. Faults
occurring due to the machine
1
3
being operated with transit bolts
fitted are out of the scope of the
warranty.
3.2 Adjusting the Feet /
Adjusting Adjustable Stays
4
X
2
1. Do not install your machine
on a surface (such as carpet)
that would prevent ventilation
4
at the base.
• To ensure silent and vibration-
free operation of your
machine, install it on a firm
surface.
• You can level your machine
using the adjustable feet.
• Loosen the plastic locking nut.
2. To increase the height of
the machine, turn the feet
clockwise. To decrease the
height of the machine, turn
the feet anticlockwise.
• Once the machine is level,
tighten the locking nuts by
turning them clockwise.
3. Never insert cardboard, wood
or other similar materials
EN - 11 EN - 11
4
X
2
1
3