Table of Contents
Advertisement
english
Clamping the Guide Bar
Finding the master cutter
:
Use a slide caliper to find the
shortest cutter and mark it, with
chalk.
This is the master cutter for filing all the
other cutters to the same length.
16
Clamping the guide bar
Depending on the position of the master
cutter
:
Clamp the guide bar in a bench vise
or, at the cutting site, the STIHL bar
vise (special accessory).
Master cutter in
Nose of guide bar
row
Left-hand
Pointing to right
Right-hand
Pointing to left
Mounting the Filing Tool
on the Guide Bar
1
:
Place the filing tool on the guide bar.
:
The clamping jaws (1) must point
towards the bar nose and be in line
with top edge of the rivet heads.
:
Tighten down the wing screw (2).
2
FG 1
Advertisement
Table of Contents
