Device Physical Features; Lcd Screen - Empi Select User Manual

LCD Screen

This is the area that displays the therapy settings as you program and use the stimulator.
Channel icons
•
Intensity
• – displayed under the Channel icons and ranges from 0.0 to 60.0
in 0.5 increments.
Software version
•
Data
• – denotes that the unit is in Data Retrieval Mode or in Quick Select
Button Reset Mode.
Rate
•
– when adjusting the pulses per second, "Rate" will be displayed next to
the value, along with "pps".
Cycle
• – when adjusting the cycle time, "Cycle" will be displayed next to the
cycle time value along with "sec".
Span
• – when adjusting the span percentage, "Span" will be displayed next to
the span percentage value along with "%".
Custom text
•
default parameters have been changed and saved, the Custom text will
denote that the buttons have been customized.
Program options
•
Modulation) can be selected with the Mode button.
Lock icon
•
has occurred within 15 seconds, the Lock icon appears to tell the user that the
unit is locked and intensity/program cannot be changed until it is unlocked.
Pad contact icons
•
and flash, indicating bad contact.
Battery icon
•
Quick Select programs
•
(Knee, Shoulder, Low Back/Hip, Hand/Wrist, and Back).
Select User's Manual
System Components
– denotes the channel being used – Channel 1 and/or Channel 2.
– displays for a few seconds when the Select is turned on.
– for each of the Quick Select Program options, when the
– four program options (Continuous, Burst, SMP and
– when treatment intensity is set at greater than zero and no activity
– two icons – one for each channel; icons will display
– displays the battery life.
– five pre-set programs for particular body areas
17