Editing Default Values - Dometic GROUP WAECO VAS 581 001 Operating Manual

Initial start-up
7.7

Editing default values

The A/CServiceCenter has preset values for the most important service
tasks. The default values appear automatically when you select the
respective menu.
You can alter the following default values if necessary:
Parameter
Pressure increase test time min.
Vacuum time min.
Leak test min.
PAG oil ml. (additional quantity)
UV tracer ml.
Filling Qt. g.
Print recovery value?
Container size ml
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service".
4. Press ENTER to confirm.
5. Enter the password "3724".
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER to confirm.
8. Press STOP to access the standby menu.
84
Short selection
Free selection
Other selections
ENTER-OK
VAS 581 001
Default value
1
20
10
0
0
500
Yes
250
EN