Table of Contents
Advertisement
Parts identification
Protective cap
Outer foil section
1 Foil frame
2 Outer foil
Inner blade
Main body
3 Foil frame release button
4 Power switch [0/1]
5 Switch lock button
6 Plug lock release button
7 Plug
Cleaning brush
8
ES-RP40.indb
8
Charge
Charging the shaver
Perform the following steps to charge the shaver if it
seems to lose the speed.
1
Turn off the shaver.
• Your shaver cannot be charged when it is turned on.
2
Draw out the plug completely until it
clicks.
• Please always keep your hands dry.
3
Plug in the appliance to the power outlet.
Now, the shaver begins charging.
• Do not touch the plug pins with your
fingers when plugging in the plug, in
case of electric shock.
• Charging is completed after approx.
8 hours.
4
Disconnect the plug after charging.
• Adequate ambient temperature for using is 0‑35 °C.
If you use the appliance in temperature outside of
the recommended range, it may stop functioning.
• When charging the shaver for the first time or
when it has not been used for more than 6
months, please charge it for 16 hours before using
(to activate the batteries).
5
Push back the plug to fold while
pressing the plug lock release
button.
2011-6-1
10:32:08
Advertisement
Table of Contents
