Removing The Built-In Rechargeable Battery; Replacement Parts - Panasonic ES-RP40 Operating Instructions Manual

2. Gently push the outer foil in the
way as illustrated. Then it will pop
up from the foil frame.
3. The new outer foil should be
slightly bent and pushed in until it
is hooked in the foil frame.
► Replacing the inner blade
1. Press the foil frame release button
and take out the outer foil section.
2. Remove the inner blade.
• Do not touch the edges (metal
parts) of the inner blade to
prevent injury to your hand.
3. Insert the inner blade until it clicks.

► Replacement parts

Replacement parts are available at your dealer or
Service Center.
Replacement parts
for ES-RP40
10
ES-RP40.indb 10
Outer foil ES9943
Inner blade ES9942

Removing the built-in rechargeable battery

Remove the built-in rechargeable battery before disposing
of the shaver. Please make sure that the battery is
disposed of at an officially designated location if there is
one. Do not dismantle or replace the battery so that you
can use the shaver again. This could cause fire or an
electric shock. Replace it at an authorized service center.
• Remove the plug from the power outlet when
removing the battery.
• Perform steps 1 to 8 and lift the battery, and then
remove it.
For environmental protection and recycling
of materials
This shaver contains a Nickel-Metal Hydride battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your
country.
2011-6-1 10:32:09