Pos. Operating or display elements
6 Button: Stop/slat:
"Up" move command of the channel
7 Status LED of the channel, below (red) Indicates the status of the respective channel.
5, 7 Status LEDs of the channel, above
and below (red):
8 Test contacts
Type overview
Type
N 545D31
N 543D51
Version of the Engineering Tool Software
Application
Engineering Tool Software (ETS)
Smart Infrastructure
Building Products
Function
Short press of button (< 1 s):
●
Move command "Stop" or "Raise"
●
Activate direct operation for the channel.
Long push of button (> 1 s):
●
Move command "Up" active
●
Activate direct operation for the channel.
●
LED switched off: Direct operation is switched off.
●
LED lit: Move command "Up" active.
●
LED flashing in sync with status LED: Direct operation is
switched on.
Both LEDs lit: Override active.
Metering point for voltage testing
Description
Article number
Solar protection
5WG1545-1DB31
actuator,
4 x 6 A
Solar protection
5WG1543-1DB51
actuator,
8 x 6 A
Version
ETS 5 or above
KNX PL-Link
yes
yes
9
A6V11986596_en--_e
2022-04-27