Advertisement
For safe end position detection, the threshold value for electricity can be adjusted. The elec-
tric current is evaluated in the process.
Status messages
Responses on element positions, such as dynamic element position, slat position, moves,
moving directions, reaching the upper or lower end position are reported. In addition, re-
sponses to the different overrides, current operating mode such as direct operation or auto-
matic operation can be displayed. In automatic end position detection, a status on the calib-
ration of the move time is communicated.
Diagnostic functions
Load current overloads or contact faults can be reported.
Smart Infrastructure
Building Products
5
A6V11986596_en--_e
2022-04-27
Advertisement
