Advertisement
Quick Links
GAMMA instabus
Solar protection actuator 4/8 x 6 A
N 543D31, N 543D51
A6V11986596_en--_e
2022-04-27
The solar protection actuators are used to control shutters, roller shutters, awn-
ings, sunblinds or ventilation flap drives with up to AC 230 V.
●
End position detection by current sensing for automatic move time determination.
●
Direct operation for efficient installation displaying the moving direction and active
overrides via LED.
●
Maintenance-free terminals for connecting and looping through solid, stranded and
fine-stranded conductors. Every L-conductor connection feeds two channels.
Functions for configuration with ETS
●
Extensive control and override functions and status messages for each channel
●
On-site control of the drives
●
Direct moving to element or slat positions.
●
Automatic control of the drives with configurable behavior when the sun is shining
(sun tracking control)
●
Scene control for calling up and storing defined element positions
●
Safety functions through overrides in case of wind, rain, frost, moving blocks etc.
Smart Infrastructure
Building Products
Advertisement
Need help?
Do you have a question about the N 543D31 and is the answer not in the manual?
Questions and answers