Table of Contents
Advertisement
4.
User interface
4.1. The On/Off button
4.2. The Mode button
4.3. The Timer button
Button/indicator
NO/OFF
Mode
Timer
Breeva Shield ™
Filter
Air Quality
Lock
1.
After the appliance is connected to a power supply, the
button lights up.
2.
Press the On/Off button to switch the appliance on, you
will hear a "ding" sound that indicates a successful
operation.
1.
Press to adjust the wind speed, switch to the Do not
disturb mode or Auto mode. You will hear a "ding" sound
that indicates the successful operation.
2.
Press and hold
"ding", you will enter the rest mode, in which all lights on
the control panel go off. To turn on the lights, please press
and hold
again for 3 seconds until you hear a "ding"
sound.
Icons
Functions
Switch On
Connect to a Wi-Fi
network
Set wind speed
Auto mode
Do
not
mode
Set Timer
Negative ions
UV-C
Reminder for a
replacement and
filter reset
Air quality
indicator (No
button)
Control panel lock
for 3 seconds until you hear a
disturb
Advertisement
Table of Contents
