Related Manuals for TCL breeva Pro 700 Premium
Summary of Contents for TCL breeva Pro 700 Premium
- Page 1 Air Purifier User Manual Model: breeva Pro 700 Premium Please read this user manual carefully before you use the appliance If there is inconsistency between the image and the actual product, the actual product shall govern.
-
Page 2: Table Of Contents
Table of Contents Product overview ............01 Packing list ............01 Instructions for use ............02 User interface ............05 Cleaning the air purifier ............07 Cleaning the filter ............08 Replacing the filter ............10 Instructions on connection ............12 Troubleshooting ............13 Product specifications ............14 Name of each part ............14... - Page 3 FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 4 The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. - French: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada.
- Page 5 • Do not operate equipment that is visibly damaged. • Do not immerse the device in water or other liquids. • Place the appliance in a place where it cannot be knocked over. • Please unplug the power plug when cleaning, maintenance or equipment. •...
- Page 6 If the UV-C emitter cannot be replaced, it must be clearly stated. • Failure to use the device as intended or damage to the housing may result in the escape of dangerous UV-C radiation. Even in small doses, UV-C radiation can cause damage to the eyes and skin. • Make sure the device is disconnected from the mains power supply before removing the protective cover.
-
Page 7: Product Overview
Product overview This air purifier can remove smoke and dust, and is designed for places with cigarette, dust, pollen, and other particles. For example, it can remove cigarette smoke and help reduce the chances of being exposed to secondhand smoke, and thus keep your family healthy. This air purifier is equipped with a composite filter, which can efficiently remove airborne particles and effectively reduce PM2.5 particles, formaldehyde, and odor (smoke), to make sure the air you breathe is clean and fresh. -
Page 8: Instructions For Use
Instructions for use Notes on filters This air purifier comes with all filters installed. Please make sure you remove all filter packaging before using the appliance. Please remove all filters and their packaging as shown below and put them back into the purifier. 1：... - Page 9 Instructions for use Install filters Put your fingers on the buttons on the left and right sides of the appliance and press inward, the front cover will pop open automatically. Button Button Open the front cover upward toward you. Remove all filter medium of the purifier...
- Page 10 Remove all packaging materials from the filters. Assemble the complete filter set into the air purifier in order. Note: Make sure that the side of the HEPA activated carbon filter with a handle is pointing towards you, and make sure all hooks of the pre-filter are properly attached to the purifier.
-
Page 11: User Interface
User interface Button/indicator Icons Functions NO/OFF Switch On Connect to a Wi-Fi network Mode Set wind speed Auto mode disturb mode Timer Set Timer Breeva Shield ™ Negative ions UV-C Filter Reminder for a replacement and filter reset Air Quality Air quality indicator (No button) - Page 12 Press repeatedly for up to 4 times to set the timer at 1/2/4/8H. The light goes on and the four lights at the bottom will be on as you press for 1/2/3/4 times. You will hear a 'ding' sound for each light that is on; Press and hold for 3S, the light goes off and...
- Page 13 4.4. The UV-C button 1. Turn on UV-C or negative ions: Press , light will be on and you will hear a "ding" sound, which shows it is turned on (You can turn on UV-C or negative ions separately on the App, while the two functions can only be turned on and off simultaneously on the appliance);...
-
Page 14: Cleaning The Air Purifier
5、Cleaning the air purifier Note: Always unplug the appliance before cleaning. Never immerse this purifier in water or any other liquid. Never use abrasive, corrosive, or flammable cleaning agents such as bleach or alcohol to clean any part of ... - Page 15 Use a slightly wet cotton swab to clean the dust sensor inlet and outlet; use a dry swab to dry it.
- Page 16 6、Clean the filter Note: Only the pre-filter can be cleaned with water. It is recommended that the pre-filter be cleaned every 30 days to ensure that the purifier operates at optimal performance. Please switch off the purifier and unplug it from the power supply.
- Page 17 Dry the pre-filter. Place the pre-filter back inside the purifier. Then attach all hooks to the purifier properly. To install the front cover, please attach the hooks at the bottom to the bottom of the purifier first, and then push the front cover towards the body of the purifier.
-
Page 18: Replacing The Filter
7、Replacing the filter Please follow the steps below to replace the filters properly when a replacement for the pre-filter or the HEPA activated carbon filter is needed. Note: • The activated carbon filter and HEPA filter cannot be washed with water or cleaned with a vacuum cleaner. - Page 19 Remove all packaging materials from the new filters. The order of the new filters (from the inside to the outside) is: HEPA activated carbon filter, pre-filter. Note: Make sure that the side with two flanges is facing you and that all hooks of the pre-filter are properly attached to the purifier.
-
Page 20: Instructions On Connection
Wi-Fi indicator will flash quickly, and the device will enter the configurable state. When the Wi-Fi indicator is always on, the TCL HOME APP can be used to operate the equipment after the configuration is completed. After that, you can observe whether the air quality in your home is within the target range through TCL HOME APP in real time. - Page 21 Note: If the appliance has already been connected to a Wi-Fi network, please press it to turn it off. If the Wi-Fi is not turned off, this symbol will remain on all the time and its brightness will be reduced to 50%. If the appliance is disconnected from the Wi-Fi network, you can reconfigure the connection by following the steps described in "Turn on Wi-Fi".
-
Page 22: Troubleshooting
Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, please contact the store where you made the purchase or the Consumer Service Center Problems Possible reason Solution... - Page 23 completely removed. The dust sensor is dirty. Please clean the dust sensor. The color of the Please open the windows to improve indoor air air quality Inadequate ventilation. circulation. indicator always The TVOC sensor is Put the appliance in a clean environment and stays the same.
-
Page 24: Product Specifications
Product specifications Product model breeva Pro 700 Premium Rated voltage 120V~ Rated frequency 60Hz Rated power Clean air delivery rate (CADR rating) ≥660m 46.2-79.2 ㎡ Applicable area Name of each part Front cover Pre-filter HEPA activated carbon filter Main machine...