Tpsan - Ferroli CRONO REM User Manual

10.3 tPsaN

Time programming of domestic hot water allows the storage tank temperature to be managed over various daily time
bands (it is not possible to differentiate the bands on the different days of the week).
To set the bands, follow the steps below:
1. The display shows on1 and the four time digits blinking
2. Use the buttons
3. Press the button
4. The display shows of1 and the four time digits blinking
5. Use the buttons
6. Press the button
7. Repeat the same operations from point 4 to set the remaining three time bands
NOTES In the band when the program is On, the setpoint used is SANIt
In the band when the program is Off, the setpoint used is RIDOt
On 1
HOURs 00:00
78
EN
and to set the band start time in 30-min steps
.
and to set the band end time of the band with SANIt setpoint in 30-min steps
.
Of 1 On 2
24:00 24:00
cod. 3542A970 - Rev 01 - 03/2022
FaCTORy VaLUEs
Of 2 On 3
24:00 24:00
Of 3 On 4
24:00 24:00
Of 4
24:00