Temperature Management In Inv Mode; Dhw Setpoint Adjustment - Ferroli CRONO REM User Manual

7. TEMPERaTURE MaNaGEMENT IN INV MODE

The modulating Remote Control manages 2 ambient temperature setpoints: a Comfort level and an Economy level.
The range of settable values for the two levels is as follows:
• The Economy setpoint can go from NOFRX +0,5 °C to the Comfort setpoint value – 0.5°C;
• The Comfort setpoint can go from the Economy setpoint value + 0.5°C up to 30°C.
When the selected operation status is INV, and therefore both the heating and DHW circuits are active, use the button
to select one of the following 3 ambient setpoint management modes:
Mode Icons Description
AUTO The ambient setpoint is managed according to the time programming settings. The time programming
indication icons are active.
COMF Manual mode. The active setpoint is Comfort, regardless of the time band.
ECO Manual mode. The active setpoint is Economy, regardless of the time band.
The value of the currently active setpoint can be viewed and modified using the buttons
resolution of 0.5°C.

8. DHW sETPOINT aDjUsTMENT

When the Remote Control is in INV or EST mode, it is possible to view and modify the DHW circuit setpoint value.
To access the variation mode, press the button
and with a resolution of 1°C.
The DHW setpoint variation range is a parameter communicated by the boiler card.
; therefore the value can be modified with the buttons
cod. 3542A970 - Rev 01 - 03/2022
and , with a
71
EN