First Switch-On Of The Remote Control - Ferroli CRONO REM User Manual

6 Day of the week
7
Upper digits
8 Not used
9 Lower digits
Heating circuit.
10
Symbol steady if heating is enabled (in winter mode), blinking during a heating request.
11 AUTO mode
12 Timed functions
13
Manual mode
OFF status
14
Heating is disabled, whereas the instant DHW request remains enabled.
15 Presence of flame / modulation level
16
Time programming indication

4. FIRsT sWITCH-ON OF THE REMOTE CONTROL

At first switch-on of the Remote Control, or after a long period without power, the internal backup battery is charged in
order to keep the date information in case of no power. During this charging phase, the message "CLOW" is displayed
in the upper digits.
The charging phase lasts a few minutes, during which the display and/or modification of parameters is not enabled.
The other functions are active.
cod. 3542A970 - Rev 01 - 03/2022
69
EN