Current Time; Current Operating Status; Running Text; Zone Temperature - Ferroli Connect CRP Installation And User Manual

4.5.3

CURRENT TImE

This part of the screen (ref. 6 - fig. 21) shows the current time
4.5.4

CURRENT OPERATING STATUS

This part of the screen (ref. 8 - fig. 21) is reserved for the symbols indicating the current system status.
The symbols that can appear are:
Symbol Function
STAND BY - Indicates that the system is in Standby mode: no heating/cooling request is met by the system
HEATING - Indicates that the heating function is enabled (WINTER mode). During a request, the icon blinks
COOLING - Indicates that the cooling function is enabled (SUMMER mode). During a request, the icon blinks
DHW - Indicates that the DHW function is enabled.
Heat pump - This icon appears when an operation request coming from any of the zones is active (in heating and
cooling).
4.5.5

RUNNING TEXT

Area reserved for status messages (ref. 10 - fig. 21) and information relating to the page displayed.
4.5.6

ZONE TEmPERATURE

This part of the screen (ref. 13 - fig. 21) shows the detected temperature of the selected zone.

5. GENERAL USE

5.1

SYSTEm OPERATING STATUS CHANGE

1. Using the and
, then confirm with the
2. Using the and
operating mode.
3. Confirm with the
4. After confirming, the display will show the main
screen.
90
EN
buttons, select the active area
button.
buttons, select the desired
button.
cod. 3542B380 - Rev 00 - 05/2022
T U E
C R P
2 3 / 0 7 / 1 9
M E N U
2 7 . 5
1 6 . 0 ° C
P R O G R A M A U T O
fig. 33
S Y S T E M
S T A N D B Y
H E A T I N G
C O O L I N G
D H W
fig. 34
1 2 : 1 9
M O D E