Download Print this page
Sony BC-TRN2 Operating Instructions
Sony BC-TRN2 Operating Instructions

Sony BC-TRN2 Operating Instructions

Digital imaging accessories: battery charger

Advertisement

Quick Links

4-299-672-11(1)
Battery Charger
CHARGE 灯
Chargeur de Batterie
电池充电器  标记
Operating Instructions
切换杆
Mode d'emploi
电池
电池  标记
电源插头
BC-TRN2
© 2011 Sony Corporation Printed in China
ˎ
The BC-TRN2 battery charger can only be used to charge
"InfoLITHIUM" battery packs (type G/type T/type R/type D) and
lithium ion type battery packs (type N/type G/type D).
ˎ
Designed for use with compatible Sony battery packs.
ˎ
This unit cannot be used to charge a nickel cadmium type or nickel
metal hydride type battery pack.
ˎ
"InfoLITHIUM" is a trademark of Sony Corporation.
ˎ
Le chargeur de batterie BC-TRN2 ne peut être utilisé que pour
charger les batteries rechargeables « InfoLITHIUM » (type G/type T/
type R/type D) et les batteries rechargeables au lithium-ion (type N/
type G/type D).
ˎ
Il est conçu pour les batteries rechargeables Sony compatibles.
ˎ
Cet appareil ne peut pas être utilisé pour charger une batterie
rechargeable nickel-cadmium ou nickel-hydrure métallique.
ˎ
« InfoLITHIUM » est une marque commerciale de Sony Corporation.
1
2
1
Switching lever
CHARGE
Battery pack
lamp
Battery  mark
Charger  mark
Power plug
2
Thank you for purchasing the Sony Battery charger.
Before operating this Battery charger, please read this manual thoroughly
and retain it for future reference.
Owner's Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. BC-TRN2
Serial No.
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Do not expose the batteries to excessive heat such as sunshine, fire or the
like.
To reduce the risk of fire or electric shock,
1) do not expose the unit to rain or moisture.
2) do not place objects filled with liquids, such as vases, on the apparatus.
Refer servicing to qualified personnel only.
NOTICE FOR THE CUSTOMERS IN THE U.S.A. AND CANADA
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS.
This power unit is intended to be correctly orientated in a vertical or
floor mount position.
For connection to a supply not in the U.S.A., use an attachment plug
adapter of the proper configuration for the power outlet.
The nameplate indicating operating voltage, power consumption, etc. is
located on the bottom.
Battery to be recharged for this product is follows
Brand Name
Sony
Battery Type
NP-BN1
NP-BN
NP-BG1
Rating
DC 3.6 V
DC 3.6 V
DC 3.6 V
(Typical Capacity)
2.3 Wh
2.3 Wh
3.4 Wh
(630 mAh)
(630 mAh)
(960 mAh)
Brand Name
Sony
Battery Type
NP-FT1
NP-FR1
NP-BD1
Rating
DC 3.6 V
DC 3.6 V
DC 3.6 V
(Typical Capacity)
2.4 Wh
4.4 Wh
2.4 Wh
(680 mAh)
(1,220 mAh)
(680 mAh)
CAUTION
ˎ
Use the nearby wall outlet (wall socket) when using this unit.
Even when the CHARGE lamp of this unit is off, the power is not
disconnected. If any trouble occurs while this unit is in use, unplug it
from the wall outlet (wall socket) to disconnect the power.
ˎ
Do not use this unit in a narrow space such as between a wall and
furniture.
PRECAUTION
The set is not disconnected from the AC power source (mains) as long
as it is connected to the wall outlet (wall socket), even if the set itself has
been turned off.
NOTICE FOR THE CUSTOMERS IN THE U.S.A.
CAUTION
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Notes on Use
This unit does not have dust-proof, splash-proof or water-proof

specifications.

Warranty for Recorded Content
Contents of the recording cannot be compensated if recording or
playback is not made due to a malfunction of this unit.
Where not to place this unit
Do not place this unit in any of the following locations, whether it is in
use or in storage. Doing so may lead to a malfunction.
ˎ
In direct sunlight such as on dashboards or near heating apparatus, as
this unit may become deformed or malfunction
ˎ
Where there is excessive vibration
ˎ
Where there is strong electromagnetism or radiant rays
ˎ
Where there is excessive sand
In locations such as the seashore and other sandy areas or where dust
clouds occur, protect this unit from sand and dust. There is a risk of
malfunction.
Precautions on Use
ˎ
Connect this unit to an available wall outlet (wall socket). Even when
the CHARGE lamp of this unit is off, the power is not disconnected.
If any trouble occurs while this unit is in use, unplug it from the wall
outlet (wall socket) to disconnect the power.
ˎ
Do not use this unit in a narrow space such as between a wall and
furniture.
ˎ
Attach the battery pack firmly to this unit when charging the battery
pack.
ˎ
The battery terminal may be damaged if the battery pack is not attached
correctly.
ˎ
To protect the battery pack, remove it from this unit when charging is
completed.
ˎ
Do not drop or apply mechanical shock to this unit.
ˎ
Keep this unit away from TVs or AM receivers.
Noise from this unit may enter a TV or radio if placed nearby.
ˎ
Unplug this unit from the wall outlet (wall socket) after use.
ˎ
Be sure that nothing metallic comes into contact with the metal parts of
this unit. If it does, a short may occur and this unit may be damaged.
ˎ
Do not connect this unit to a voltage adaptor (travel converter) for
overseas travel. This may result in overheating or another malfunction.
ˎ
The battery pack and this unit can become warm during or
immediately after recharging.
Maintenance
ˎ
If this unit gets dirty, wipe it using a soft dry cloth.
ˎ
If this unit gets very dirty, wipe it using a cloth with a little neutral
solvent added, and then wipe it dry.
ˎ
Do not use thinners, benzine, alcohol, etc., as they will damage the
surface of this unit.
ˎ
When you use a chemical cleaning cloth, refer to its instruction
manual.
ˎ
Using a volatile solvent such as an insecticide or keeping this unit
in contact with a rubber or vinyl product for a long time may cause
deterioration or damage to this unit.
To Charge the Battery Pack
The battery pack is charged by attaching it to this unit.
1 Attach the battery pack.
Before attaching
When you use a battery pack type G, before attaching the battery pack
to this unit, operate the following procedure.
* If you use a battery pack type N, type T, type R or type D, you do not
need the following procedure.
Lift the switching lever up (See illustration -1).
Press the switching lever to the point marked  on the illustration
until it clicks (See illustration -2).
How to attach the battery pack
Align the battery  mark in the direction of the charger  mark and
insert it in the direction of the arrow (See illustration -1).
(The battery pack illustrated is type N.)
After inserting it as far as it will go, press lightly in the direction of the
arrow until it clicks into place (See illustration -2).
2 Pull the power plug up, and then connect it to a wall outlet
(wall socket).
The CHARGE lamp (orange) lights up and charging begins.
When the CHARGE lamp goes out, normal charging is completed
(Normal charge).
For a full charge, which allows you to use the battery pack longer than
usual, leave the battery pack in place for approximately another one
hour (Full charge).
Always connect the power plug with the prongs at the top (See
illustration ).
Do not connect the power plug with the prongs at the bottom (See
illustration ).
To remove the battery pack
Lift the battery pack up and remove it.
Charging time
The following table shows the charging time for a battery pack that is
completely discharged.
Battery
NP-BG1/
NP-BN1
NP-BN
pack
NP-FG1
Normal
charging
85
95
135
time
ˎ
Approximate number of minutes to fully charge an empty battery pack
(Full charging time).
ˎ
Numbers in parentheses indicate the time to charge normally (Normal
NP-FG1
charging time).
DC 3.6 V
ˎ
For more about the battery life, see the instruction manual of your
3.4 Wh
digital still camera.
(960 mAh)
ˎ
The charging time may differ depending on the condition of the battery
pack or the ambient temperature.
NP-FD1
ˎ
The times shown are for charging an empty battery pack which has
DC 3.6 V
been run down with a digital still camera, using this unit at an ambient
2.4 Wh
temperature of 25 °C (77 °F).
(680 mAh)
Charging temperature
The temperature range for charging is 0 °C to 40 °C (32 °F to 104 °F).
For maximum battery efficiency, the recommended temperature
range when charging is 10 °C to 30 °C (50 °F to 86 °F).
To use the battery pack quickly
You can remove the battery pack from this unit and use it even if charging
is not completed. However, the charging time affects the time that the
battery pack can be used.
Notes
ˎ
If the CHARGE lamp does not light up, check if the battery pack is
firmly attached to this unit.
ˎ
When a fully charged battery pack is installed, the CHARGE lamp
lights up once and then goes out.
ˎ
A battery pack that has not been used for a long time may take longer
than usual to charge.
This unit supports worldwide voltages 100 V to 240 V.
Do not use an electronic voltage transformer, as this may cause a
malfunction.

Troubleshooting

When the CHARGE lamp blinks, check through the following chart.
The CHARGE lamp blinks in two ways.
Blinks slowly: Turns on and off repeatedly every 1.5 seconds
Blinks quickly: Turns on and off repeatedly every 0.15 seconds
The action to be taken depends on the way the CHARGE lamp blinks.
When the CHARGE lamp keeps blinking slowly
Charging is pausing. This unit is in the standby state.
If the room temperature is out of the appropriate temperature range,
charging stops automatically.
When the room temperature returns to the appropriate range, the
CHARGE lamp lights up and charging restarts.
We recommend charging the battery pack at 10 °C to 30 °C (50 °F to
86 °F).
When the CHARGE lamp keeps blinking quickly
When charging the battery pack for the first time in one of the
following situations, the CHARGE lamp may blink quickly.
If this happens, remove the battery pack from this unit, reattach it and
charge it again.
 When the battery pack is left for a long time
 When the battery pack is left installed in the camera for a long time
 Immediately after purchase
If the CHARGE lamp keeps blinking quickly, check through the following
chart.
Remove the battery pack that is being charged and then rmly attach the same
battery pack again.
The CHARGE lamp blinks again:
The CHARGE lamp lights up and
Install another battery pack.
does not blink again:
If the CHARGE lamp goes out
because the charging time has
passed, there is no problem.
The CHARGE lamp blinks again:
The CHARGE lamp lights up and
e problem is with this unit.
does not blink again:
If the CHARGE lamp goes out
because the charging time has
passed, the problem is with the
battery pack rst installed.
Please contact your nearest Sony dealer in connection with the product that may
have a problem.
Specifications
Input rating
100 V - 240 V AC 50 Hz/60 Hz
11 VA - 15 VA 6 W
Output rating
Battery charge terminal:
4.2 V DC 0.7 A
Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (Approx.) 47 mm × 42 mm × 72 mm (w/h/d)
(1 7/8 inches × 1 11/16 inches × 2 7/8 inches)
Mass
Approx. 71 g (2.5 oz)
Included items
Battery Charger (BC-TRN) (1)
Set of printed documentation
Design and specifications are subject to change without notice.
Merci pour l'achat de ce chargeur de batterie Sony.
Avant d'utiliser ce chargeur de batterie, veuillez lire attentivement ce
manuel et le conserver pour toute référence future.
Aide-mémoire
Les numéros de modèle et de série se situent sous l'appareil. Prendre en
note le numéro de série dans l' e space prévu ci-dessous. Se reporter à ces
numéros lors des communications avec le détaillant Sony au sujet de ce
produit.
Modèle no BC-TRN2
No de série
AVERTISSEMENT
Afin de réduire les risques d'incendie ou de décharge électrique, n' e xposez
pas cet appareil à la pluie ou à l'humidité.
Pour éviter toute décharge électrique n' o uvrez pas le chargeur.
N' e xposez pas les piles à une chaleur excessive, notamment aux rayons
directs du soleil, à une flamme, etc.
Pour réduire les risques d'incendie ou d' é lectrocution,
1) n' e xposez l'appareil à la pluie ou à l'humidité ;
2) ne placez pas d' o bjets remplis de liquides (vases, etc.) sur l'appareil.
Confiez toute réparation à un personnel qualifié seulement.
AVIS À LA CLIENTÈLE AUX ÉTATS-UNIS ET AU CANADA
IMPORTANTES
INSTRUCTIONS DE
SECURITE
- CONSERVEZ CES INSTRUCTIONS
DANGER
AFIN DE REDUIRE LE RISQUE
D'INCENDIE OU DE DECHARGE
ELECTRIQUE, SUIVEZ EXACTEMENT
CES INSTRUCTIONS
Cet appareil peut être installé en position verticale ou horizontale.
Pour le brancher sur une source d'alimentation hors des États-Unis,
utilisez l'adaptateur de fiche approprié à la configuration de votre prise
électrique.
La plaque signalétique indiquant la tension de fonctionnement, la
consommation, etc. se trouve sous l'appareil.
Les batteries pouvant être rechargées pour ce produit sont les suivantes
Marque
NP-FT1/
Type de batterie
NP-BN1
NP-BD1/
NP-FR1
Valeur nominale
CC 3,6 V
NP-FD1
(Capacité typique)
2,3 Wh
(630 mAh)
80
145
Marque
Type de batterie
NP-FT1
Valeur nominale
CC 3,6 V
(Capacité typique)
2,4 Wh
(680 mAh)
ATTENTION
ˎ
Utilisez une prise murale proche lorsque vous utilisez cet appareil.
Même lorsque le témoin CHARGE de cet appareil est éteint,
l'alimentation n' e st pas coupée. Si un problème devait se produire
pendant l'utilisation de cet appareil, débranchez celui-ci de la prise
murale pour le mettre hors tension.
ˎ
N'utilisez pas cet appareil dans un espace confiné, comme entre un mur
et un meuble.
PRÉCAUTION
L'appareil n' e st pas déconnecté de la source d'alimentation secteur tant
qu'il reste branché sur la prise murale, même s'il a été mis hors tension.
AVIS À LA CLIENTÈLE AUX ÉTATS-UNIS
AVERTISSEMENT
Par la présente, vous êtes avisé du fait que tout changement ou toute
modification ne faisant pas l' o bjet d'une autorisation expresse dans le
présent manuel pourrait annuler votre droit d'utiliser l'appareil.
Note
L'appareil a été testé et est conforme aux exigences d'un appareil
numérique de Classe B, conformément à la Partie 15 de la réglementation
de la FCC.
Ces critères sont conçus pour fournir une protection raisonnable contre
les interférences nuisibles dans un environnement résidentiel. L'appareil
génère, utilise et peut émettre des fréquences radio; s'il n' e st pas installé
et utilisé conformément aux instructions, il pourrait provoquer des
interférences nuisibles aux communications radio. Cependant, il n' e st
pas possible de garantir que des interférences ne seront pas provoquées
dans certaines conditions particulières. Si l'appareil devait provoquer des
interférences nuisibles à la réception radio ou à la télévision, ce qui peut
être démontré en allumant et éteignant l'appareil, il est recommandé à
l'utilisateur d' e ssayer de corriger cette situation par l'une ou l'autre des
mesures suivantes :
Réorienter ou déplacer l'antenne réceptrice.
Augmenter la distance entre l'appareil et le récepteur.
Brancher l'appareil dans une prise ou sur un circuit différent de celui
sur lequel le récepteur est branché.
Consulter le détaillant ou un technicien expérimenté en radio/
téléviseurs.
Remarques concernant l'emploi
Cet appareil n'est pas étanche à la poussière, aux éclaboussures
d'eau ou à l'eau.
Garantie concernant les enregistrements
L'utilisateur ne pourra pas être dédommagé pour une absence
d' e nregistrement ou de lecture due à une défectuosité de cet appareil.
Où ne pas poser l'appareil
Ne posez pas cet appareil aux endroits suivants, ni pour la charge ni pour
l' e ntreposage. Ceci peut entraîner une panne.
ˎ
À la lumière directe du soleil, comme sur le tableau de bord d'une
voiture ou à proximité d'un appareil de chauffage, car l'appareil peut se
déformer ou tomber en panne.
ˎ
À un endroit exposé à des vibrations excessives
ˎ
À un endroit exposé à un électromagnétisme ou à des radiations
ˎ
À un endroit où il y a beaucoup de sable
Au bord de la mer ou sur des sols sableux, où aux endroits où des
nuages de poussière sont fréquents, protégez l'appareil du sable ou de la
poussière. L'appareil risquerait sinon de tomber en panne.
Précautions d'emploi
ˎ
Raccordez cet appareil à une prise murale disponible. Même lorsque
le témoin CHARGE de cet appareil est éteint, l'alimentation n' e st pas
coupée. Si un problème devait se produire pendant l'utilisation de cet
appareil, débranchez celui-ci de la prise murale pour le mettre hors
tension.
ˎ
N'utilisez pas cet appareil dans un espace confiné, comme entre un mur
et un meuble.
ˎ
Insérez bien la batterie rechargeable dans cet appareil avant de la
charger.
ˎ
La borne de la batterie peut être endommagée si la batterie n' e st pas
insérée correctement.
ˎ
Pour protéger la batterie rechargeable, retirez-la de cet appareil lorsque
la charge est terminée.
ˎ
Ne laissez pas tomber ou n'appliquez pas de choc mécanique à cet
appareil.
ˎ
Gardez cet appareil à l' é cart des téléviseurs ou récepteurs AM.
Placé près d'un téléviseur ou d'un poste de radio, cet appareil peut
causer du bruit.
ˎ
Débranchez cet appareil de la prise murale après utilisation.
ˎ
Veillez à ne pas mettre d' o bjets métalliques au contact des pièces
métalliques de cet appareil. Ceci pourrait causer un court-circuit et
endommager l'appareil.
ˎ
Ne branchez pas cet appareil sur un adaptateur de tension
(convertisseur de voyage) lorsque vous voyagez à l' é tranger. Ceci
pourrait causer une surchauffe ou une autre défaillance.
ˎ
La batterie rechargeable et cet appareil peuvent devenir chauds pendant
ou immédiatement après la charge.
Entretien
ˎ
Lorsque cet appareil est sale, essuyez-le avec un chiffon sec et doux.
ˎ
Lorsque cet appareil est très sale, essuyez-le avec un chiffon et un peu
de solvant neutre puis séchez-le.
ˎ
N'utilisez pas de diluants, benzine, alcool, etc. car ils endommageraient
la surface de cet appareil.
ˎ
Si vous utilisez un tissu de nettoyage chimique, consultez son mode
d' e mploi.
ˎ
L' e mploi d'un solvant volatil, comme un insecticide, ou la mise en
contact direct de cet appareil avec un produit en caoutchouc ou en
plastique pendant une longue période peut détériorer ou endommager
cet appareil.
Sony
NP-BN
NP-BG1
NP-FG1
CC 3,6 V
CC 3,6 V
CC 3,6 V
2,3 Wh
3,4 Wh
3,4 Wh
(630 mAh)
(960 mAh)
(960 mAh)
Sony
NP-FR1
NP-BD1
NP-FD1
CC 3,6 V
CC 3,6 V
CC 3,6 V
4,4 Wh
2,4 Wh
2,4 Wh
(1 220 mAh)
(680 mAh)
(680 mAh)
(Suite à la page arrière)

Advertisement

loading

Summary of Contents for Sony BC-TRN2

  • Page 1: Troubleshooting

    The CHARGE lamp blinks again: Install another battery pack. The CHARGE lamp blinks again: e problem is with this unit. Please contact your nearest Sony dealer in connection with the product that may have a problem. Specifications Input rating Output rating Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
  • Page 2 Le témoin CHARGE clignote de nouveau : Le problème vient de cet appareil.   Veuillez contacter le revendeur Sony le plus proche du produit présentant éventuellement un problème. Spécifications Puissance nominale d’ e ntrée Puissance nominale de sortie Température de fonctionnement 0 °C à 40 °C (32 °F à 104 °F) Température d’...