IDVille ID MAKER Zenius User Manual page 29

3
9. Remove the "T" shaped card, then remove the film from the adhesive cleaning card
adhesive side up
10. The used adhesive card is ejected automatically into the output hopper.
. Cleaning starts.
2
9
Routine cleaning may also be carried out from the Evolis Print Center by clicking on "Start cleaning".
Warning, the "T" shaped card must be used just after the sachet is opened.
Wait for 2 minutes after cleaning before using your printer. Before using your printer, remember to
reset the gauge to the desired card thickness.
and insert the cleaning card into the feeder as shown,
1
10
29