Advertisement
ASSEMBLY
KOBE
I N D U S T R I A L
POWER TOOLS
WARNING! BEFORE ATTEMPTING TO ASSEMBLE THIS PRODUCT, MAKE
SURE YOU ARE FAMILIAR WITH ALL SAFETY INSTRUCTIONS.
CAUTION! This Drill is heavy, take care when
unpacking. Remove the Drill, together with the
accessories supplied, from the packaging.
Check carefully to ensure that the Drill is in good
condition and account for all the items listed on
page 5 of this manual. Also make sure that all the
parts are complete. If any parts are found to be
missing or damaged, the Drill and its accessories
should be returned together in their original
packaging to the retailer. Do not throw the
packaging away, keep it safe throughout the
guarantee period, then recycle if possible,
otherwise dispose of it by the proper means.
Do not let children play with empty plastic bags
due to the risk of suffocation.
The Drill comes ready assembled but it is
advisable to check mounting screws to make sure
they are tight before use.
FITTING THE CHUCK (Fig. 3 & 4)
If not already attached, screw the chuck onto the
thread on the Weldon adaptor. Loosen the grub
screws in the drill shank then insert the Weldon
adaptor into the drill spindle as shown in Fig. 2.
Tighten both Grub screws with the Hexagon key
supplied. Fig.3
FITTING THE GUARD
Position the white nylon guard over the end of the
magnet base as shown and secure in place with
the hexagon grub screws and wing nuts as shown
in Fig. 4
4
Fig.2
Fig.3
Fig.4
PARTS BREAKDOWN
KOBE
I N D U S T R I A L
POWER TOOLS
continued
9
Advertisement
