Download Print this page

Specifications - KOBE DMM3050i Operator's Manual

Magnetic drilling & milling machine 110v

Advertisement

10
NOTES
ELECTRICAL INFORMATION
KOBE
I N D U S T R I A L
POWER TOOLS
In the United Kingdom, the ELECTRICITY AT WORK ACT 1989 requires all portable
electrical appliances, if used on business premises, to be tested by a qualified
electrician, using a Portable Appliance Tester (PAT), at least once a year. The HEALTH &
SAFETY AT WORK ACT 1974 makes owners of electrical appliances responsible for the
safe condition of the appliance and the safety of its operator. If in any doubt about
electrical safety, contact a qualified electrician.
ELECTRICAL SAFETY
l An RCCB (Residual Current Circuit Breaker) should be fitted in the mains electricity
distribution board. If the power supply is not protected by an RCCB, it is highly
recommended that an RCD (Residual Current Device) is used with all portable
electrical products.
l Do not use any adaptor plugs.
l Do not carry or yank the tool by the cord/hose.
l Never expose power tools to rain or wet conditions as this will increase the risk of
electric shock.
l Use an outdoor extension cord when operating a power tool outside.
EXTENSION REELS
When a cable extension reel is used it should be fully unwound before being connected.
Use at least 1.5mm
section cable or to be absolutely sure use 2.5mm

SPECIFICATIONS

KOBE
2
I N D U S T R I A L
POWER TOOLS
MODEL: ..................................... DMM3050i
ORDER CODE: .................... KBE-268-4210K
MOTOR: ................ 1200W/110V/50/60Hz
ARBOR: ................................ 19mm Weldon
CHUCK SIZE: .........................................
SPEED: ........................................... 595rpm
MAGNETIC ADHESION: .................. 13,000N
WEIGHT: ............................................. 17kg
SIZE: ........... 580(H) x 470(W) x 180(D)mm
section cable.
2
DRILLING CAPACITIES:
CORE DRILL ................................ 12-35mm
TWIST DRILL .............................. 1.5-13mm
COUNTERSINK ............................ 10-40mm
"
CUTTING DEPTH: .............................. 50mm
1/ 2
STROKE: ......................................... 165mm
SOUND PRESSURE (LPA): .......... 109.5 dBA
SOUND POWER (LWA): .............. 107.8 dBA
VIBRATION LEVEL: ......................... 1.5m/s
2
3

Advertisement

loading