Preventative Maintenance - Sunrise Medical Switch-It Cool Cube Owner's Manual

PREVENTATIVE MAINTENANCE

1. Ensure that the Cool Cube and associated switches are protected from prolong exposure to water.
2. Cleaning procedure:
a. Power down wheelchair and unplug Cool Cube, switches and sensors.
b. Use clean lint free cloth and mild soap to gently wipe down surfaces of Cool Cube, switches, and sensors.
c. Once wiped down use a dry lint free wipe and remove any moisture from surface of Cool Cube, switches,
and sensors.
WARNING
Mounting and Cable routing procedure:
WARNING
1. Ensure Cool Cube is firmly mounted to powerchair using Velcro or double sided adhesive.
2. Cool Cube should be mounted out of the way of the movement of the seat actuators.
3. Ensure all cable routing is held securely to the powerchair. This can be accomplished using cable ties.
4. There should not be any loose cabling. The loose cable could get caught on an object while moving causing the
device to become unplugged resulting in a failure to control your powerchair.
Audible Feedback and Mounting:
WARNING
1. If user requires audible feedback while using the Cool Cube ensure Cool Cube hub is mounted where the user can
hear the speaker, such as closer to the user's ear.
Port Usage:
WARNING
1. A switch or sensor must be plugged into the port for it to operate.
2. Label on Cool Cube describing port functionality may be difficult to read in direct sunlight or may become
bleached by the sun over time. Use this document's figures to appropriately identify the port functionality.
3. If a switch or sensor comes unplugged it will cease to operate.
4. There are 6 ports on the Cool Cube:
a. Forward - Used for forward movement of the wheelchair.
b. Reverse - Used for reverse movement of the wheelchair.
c. Right - Used for right movement of the wheelchair.
d. Left - Used for left movement of the wheelchair.
e. Mode - Used for mode changes of the wheelchair.
f. Off - Used for the off function of the wheelchair.
5. While in 2 Switch Driving or 3 Switch Driving, there will be a slight delay in the Forward(Reverse) command
before the chair will start to move. This is to allow the possibility of tap to change direction of movement.
WARNING
Flammability:
1. Do not allow Cool Cube, switches, or sensors to come into contact with an open flame. This could cause
devices to malfunction or degrade in usability.
General Warnings:
WARNING
1. Do not rest any objects on the device.
2. Ensure wheelchair is powered off when in a vehicle or during patient transfer.
3. Ensure wheelchair is powered off when changing switches or sensors.
4. Do not use in inclement weather, i.e. rain, snow or hail.
5. If the wheelchair or Switch It device behaves erratically, please contact your local dealer or Switch-It rep.
249056 Rev. C 7 Cool Cube