SCHNERZINGER GRID PROTECTOR Quick Start Manual

GRID PROTECTOR
GRID 2022-03 V1 en
Dear customer,
Thank you for your purchase of a
SCHNERZINGER product.
Please take the time to precisely read the
information in this guide. You will find
important instructions to use your product
and hints for the optimal integration into
your HiFi system.
This guide facilitates your use of the
product, promotes understanding
functional characteristics and helps you to
obtain the full efficiency of the product.
We hope you enjoy your
SCHNERZINGER product.
Picture similar
Package Contents
GRID PROTECTOR
12V Power Supply
(cable length 1,5m)
Antenna
Dimensions and weight
l 16.3 cm
its
w 16.3 cm
h 7.7 cm
2.6 kg
new
The antenna is 11 cm long.
GRID PROTECTOR
The GIGA CANCELING technology of the GRID PROTECTOR penetrates and clears up
the entire domestic power grid from sound damaging interfering fields, caused by the
electrical devices in the home (computer, refrigerator, cooktop, router, etc.).
*
Note the correct phase
when connecting to
the power grid
(marked with a silver
dot on the plug of the
device).
Measure the phase of
the socket accordingly.
Setting up step by step
1. Power connection and antenna
Connect* the GRID PROTECTOR at the first slot of the HiFi system power distributor. If
this is not feasible, select a socket of the same circuit.
Operate initially without 12V power supply.
Connect antenna (upright position).
2. Basic setting
All three switches in base setting 0, the LED is off.
The switch POWER usually remains in the basic setting 0, the LED remains off.
3. Switch BANDWIDTH
First listen in the basic setting and then switch to position I and II. Listen in comparison
and keep the best setting.