2 - 2
Fig. 2
•
Remove the protection covers from the single tank and the collimator.
•
Remove the 4 Allen screws (2/Fig. 2, 17 mm spanner opening ), the strap (3/Fig. 2) and
the U-shaped rail (4/Fig. 2).
•
Bring the foot pedal from the locking position into the maneuvering position
(6/Fig. 3). For other foot pedal positions, refer to the operating instructions.
•
Remove the 2 Allen screws and the bracket (7/Fig. 2, 17 mm spanner opening) from the
stand trolley on the right and left side.
•
Push the POLYMOBIL Plus over the rail (8/Fig.3) and move it off the pallet via the ramp
(9/Fig. 3).
POLYMOBIL Plus
Fig. 3
SPR8-125.034.01
Rev. 03
01.00
Unpacking
Page 2 of 2
TD SD 24
Medical Engineering
Siemens AG