ABB ACS580-01 +C135 Series Original Instructions Manual page 31

3. Attach chains to the drive lifting holes and lift the drive with a lifting device
onto the opening in the mounting plate.
4. Attach the bottom bracket with one screw.
5. Attach the top bracket with one screw.
6. Attach the rest of the mounting screws. Remove the chains.
3
5
Mechanical installation – Frames R1 to R3 31
4
1 × M6×25 screw
6 N·m (4.4 lbf·ft)
6
1 × M6×25 screw
6 N·m (4.4 lbf·ft)
R1: 8 × M6×25 screw
R2: 10 × M6×25 screw
R3: 12 × M6×25 screw
6 N·m (4.4 lbf·ft)