Bush WO378 Instruction Manual page 19

Getting to know your CD Micro HiFi
You'll be up and running in no time
Connect to a Bluetooth device
Check that your HiFi is in Bluetooth (BT) mode. If you are not already in BT mode, press
and release the Mode button until you are in BT mode (check the display). 'Bluetooth
Searching' will be displayed, whilst your product searches for Bluetooth devices.
In Bluetooth (BT) Mode:
1. 'Bluetooth Searching' will be displayed whilst your product searches for Bluetooth
devices.
2. On the device that you would like to connect to your HiFi via Bluetooth (e.g. iPhone/
iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is 'discoverable' .
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to 'Add new device' , if necessary.
Note: Some products will automatically search for a new device and so the 'Add new
device' option is not available.
4. When found, your HiFi will be displayed as 'BUSH WO378' . Select the device name to
begin pairing.
5. When pairing is complete 'Bluetooth Connected' will be displayed.
6. Now that you have paired your device with the HiFi, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the HiFi unless you decide to disconnect or 'unpair'
it.
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your CD Micro HiFi
19