Wireless Ethernet Ports; Supported Wireless Standards; Radio Characteristics - Siemens SIMATIC NET RUGGEDCOM RS930W Installation Manual

Communication Ports
4.3 Wireless Ethernet Ports
Off
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.3

Wireless Ethernet Ports

The RUGGEDCOM RS930W supports an optional set of IEEE 802.11 compliant
wireless Ethernet ports for accessing a Wireless Local Area Network (WLAN).
Depending on the options chosen, the device is permitted for use in either North
America (US), the European Union (EU), Australia (AU), or India (IN).
4.3.1

Supported Wireless Standards

4.3.2

Radio Characteristics

Modulation
Frequency Range
Data Rate
Channels
Output Power
24
State
Standard
IEEE 802.11g 54 Mbps (WLAN)
IEEE 802.11b 11 Mbps (WLAN)
Strong Encryption
IEEE 802.11i
Enhanced Encryption
Basic Encryption
IEEE 802.1x Wireless Authentication
Direct Sequence Spread Spectrum 802.11b/OFDM 802.11g
2.4 Ghz to 2.4965 Ghz
6-54 Mbps: OFDM
11 Mbps: CCK
5.5 Mbps: CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
11 - US (FCC)
11 - CAN (IC)
14 - Japan (MKK)
13 - Other countries (ETS)
100 mW (20 dBm) 802.11b 11 Mbps Data Rate
100 mW (20 dBm) 802.11g 6-24 Mbps Data Rate
79 mW (19 dBm) 802.11g 36 Mbps Data Rate
No link detected
33)".
Parameter
Full Access Point
Client support
WPA2-AES (CCMP)
WPA-TKIP (RC4)
Personal or Enterprise
Description
"Fiber Optic
Mode
2.4 GHz ISM
Backwards compatibility
Robust Secure
Network (RSN)
Temporal keys
WEP (RC4) Up to 4 static keys
PSK or RADIUS
Installation Manual, 04/2022, C79000-G8976-1035-11
Notes
RUGGEDCOM RS930W