Determine Operation Mode
Refer to the following table to determine an appropriate operation mode as
needed.
Mode
Operation
Switch
Mode
3G/4G
3G/4G
Router
WISP Client
WISP
Router
Access
AP
Point
Connect the Hardware
1. Switch the operation mode to the determined one.
Note: By setting the router to AP Mode, you can also access the other four modes:
Repeater, Bridge, Client and Multi-SSID. For details, please refer to the User Guide at
Scenario
I want to share the 3G/4G network with my local devices.
I want to have internet access from a Wireless Internet Service
Provider (WISP), and share internet with local devices.
I want to access internet wirelessly, but only a wired network is
available.
English
1