Specifications - Zojirushi MICOM NL-DSQ10 Operating Instructions Manual

Rice cooker & warmer
Table of Contents

Advertisement

SPECIFICATIONS

Model No.
WHITE
(Long Grain White Rice)
QUICK
(Long Grain White Rice)
SHORT GRAIN WHITE
(Short Grain White Rice)
Cooking
MIXED
(Long Grain White Rice)
Capacity of
SUSHI
Each Menu
(Short Grain White Rice)
SWEET
Setting
(Sweet Rice Only or
Sweet Rice + Long Grain White Rice)
(approx. L)
CONGEE THICK
[cups]
(Long Grain White Rice)
CONGEE THIN
(Long Grain White Rice)
BROWN
(Medium Grain Brown Rice, Long Grain Brown Rice)
CAKE
Rating
Electric Consumption
Average Power Consumption during Keep Warm
Rice Cooking System
Power Cord Length
External Dimensions <approx. cm>
26.5 (W) × 37 (D) × 21.5 (H) (41.5
Weight
●The average power consumption during Keep Warm is calculated with the Rice Cooker at maximum capacity and at a room temperature of 20℃.
●This product may not operate properly in certain environments or places with high altitudes or extreme weather conditions.
Please avoid using this product in such areas.
●This product cannot be used in areas where power supply voltage or power supply frequency is different.
●(*1) Height with the Outer Lid open.
■WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow: Earth
Brown or Red: Live
If the colours of the wires in the mains lead of this appliance do not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wide coloured green-and-yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol or coloured green or green-and-yellow. The wire coloured blue must be
connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured RED.
This appliance must be protected by a 13A fuse if a 13A (BS1363) plug is used or, if any other type of plug
is used, by a 10A fuse either in the plug or adaptor or at the distribution board.
GREEN AND YELLOW
BLUE or BLACK
How to change the Fuse
If the Power Plug of your Power Cord (See P.4) is,
A. A type that can be disassembled. Refer to above.
B. A solid molded type that can not be disassembled. Please refer to the following.
1. Open the Fuse Cover of the Power Plug.
2. Replace the Fuse (13A) that is inside with a new Fuse. (Be sure to replace
with a 13A Fuse)
3. Fit back the Fuse Cover with the new Fuse to the Power Plug.
Caution
Do not connect the Fuse directly to the Power Plug. The Fuse Cover can not be attached.
26
NL-DSQ10
NL-DSQ18
0.18–1.0
[1–5.5]
0.36–1.8
0.18–1.0
[1–5.5]
0.36–1.8
0.18–1.0
[1–5.5]
0.36–1.8
0.18–0.72
[1–4]
0.36–1.08
0.18–1.0
[1–5.5]
0.36–1.8
0.18–0.72
[1–4]
0.36–1.08
0.09–0.18
[0.5–1]
0.09–0.27
0.09
[0.5]
0.09–0.18
0.18–0.72
[1–4]
0.36–1.44
All-purpose flour, 120 g
All-purpose flour, 180 g
AC 220–230 V  50/60 Hz
605–660 W
825–900 W
33 W
39 W
Direct Heating
1.0 m
)
29 (W) × 39.5 (D) × 25 (H) (47.5
*1
approx. 4.0 kg
approx. 5.2 kg
Blue or Black: Neutral
13 AMP FUSE
BROWN or RED
Power Plug
[2–10]
[2–10]
[2–10]
[2–6]
[2–10]
[2–6]
[0.5–1.5]
[0.5–1]
[2–8]
)
*1
Fuse Cover
Fuse
(13A)
Fuse Cover

Advertisement

Table of Contents
loading

This manual is also suitable for:

Micom nl-dsq18

Table of Contents