all pixels displaying white at center 5 location.
The variation in surface luminance, _WHITE is defined (center of Screen) as:
3.
δHITE(9P)= Minimum(Lon1, Lon2,...,Lon9)/ Maximum(Lon1, Lon2,...Lon9)
Response time Tr is the average time required for display transition by switching the input signal for five
4.
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.
The response time is defined as the following figure and shall be measured by switching the input
signal for
"any level of grey(bright) " and "any level of gray(dark)".
Any level of gray (Bright)
(Bright)
FIG. 2 Luminance
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are
determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is
normal to the LCD surface. For more information see FIG3.
Any level of gray (Dark)
12
Any level of gray